VS 65/150 M

Pump for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems. Operating range: from 0,6 a 3,7 m3/h with head of up to 6 metres. Copper piping welded union connectors: Ø 22 mm Ø 28 mm. Working pressure: 10 bar (1000 kPa). Liquid temperature range: from -10 °C to +85 °C for sanitary uses, and +110 °C for other uses. To avoid the formation of calcium, do not exceed 65 °C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.

Specifikation

Pump for hot water circulation in hot water domestic systems of the closed and pressurised or open tank type. Also suitable for solar power systems. Single body formed of the bronze hydraulic unit. Die-cast aluminium motor casing. Technopolymer impeller. Alumina driving shaft mounted on graphite brushings lubricated by the pumped liquid itself. Stainless steel protective rotor sleeve, stator sleeve and closing flange. Ceramic thrust bearing, E.P.D.M. “O” rings. The two-pole asynchronous motor with wet rotor is selfprotected for resistance. No overload protection required. Operating range: from 0.5 to 3,6 m3/h with head up to 6 metres. Liquid temperature range: from -10°C to +85°C (for sanitary use) +110°C (for others use). Pumped liquid characteristics: clean, free from solids and mineral oils, non viscous, chemically neutral, close to the characteristics of water (max 30% glycol). Maximum working pressure 10 bar (1000 kPa). Protection level IP 44 Insulation class F Cable grommet PG 11 Installation with motor axis horizontal

Teknisk specifikation

Unik ref.VS-65-150-M
ProduktfamilieCirculators
ProduktgruppeWet Rotor Electronic Circulators
TypeObjekt (enkelt objekt)
Udgivelsesdato2019-08-19
Udgavenummer1

Links

Produkt-URLhttps://www.dabpumps.com/en/products/circulators/wet-rotor-circulators/vs
Monteringsvejledninghttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_60161045.pdf
Teknisk beskrivelsehttps://www.dabpumps.com/sites/default/files/2016-03/VS_TS_ENG.pdf

Relateret

Materiale primærtBronze
Materiale sekundærtPlast
Designet iItalien
Fremstillet iItalien

Klassifikation

BIMobject-kategoriVVS - Pumper
UNSPSC-navnCirculating pumps
UNSPSC-kode40151504
CSI MasterFormat 2014-kode22 35 23
CSI MasterFormat 2014-titelCirculating, Domestic Water Heat Exchangers

Tilgængelighed i region

Europa
Åland
Albanien
Andorra
Belgien
Bosnien-Herzegovina
Bulgarien
Cypern
Danmark
Estland
Færøerne
Finland
Frankrig
Gibraltar
Grækenland
Guernsey
Holland
Hviderusland
Irland
Island
Isle of Man
Italien
Jan Mayen
Jersey
Kroatien
Letland
Liechtenstein
Litauen
Luxembourg
Malta
Moldova
Monaco
Montenegro
Nordmakedonien
Norge
Østrig
Polen
Portugal
Rumænien
Rusland
San Marino
Schweiz
Serbien
Slovakiet
Slovenien
Spanien
Storbritannien
Sverige
Tjekkiet
Tyskland
Ukraine
Ungarn
Vatikanstaten