NKVE-Booster-sets

Name: NKVE-Booster-sets
Rating: 4.4 (10 reviews)

4.4(10 reviews)

1, 2, 3, 4 NKVE 10, 15, 20, 32, 45 MCE-P are variable pressure units for residential building service and commercial building service. They can also be used in agriculture and in watering systems. NKVE are 1, 2, 3 or 4 multi-impeller vertical centrifugal pumps with coupling with MCE-P variable frequency drive installed as standard. The models with NKVE 10 S, 15 S, 20 S have the parts in contact with the liquid in AISI 304 stainless steel. The models with NKVE 32 and 45 have the pump body and upper flange in cataphorized cast iron. The impellers, diffusers and pump casing are in AISI 304 stainless steel. One control unit and one pressure sensor per units. Delivery check valve and expansion vessel for each pump. X version with materials in contact with water in stainless steel AISI 316. The units are supplied assembled, set and tested directly at the factory. IE3 electric motors. D.Connect ready (D.Connect Box supplied separately).

Specifikation

1, 2, 3, 4 NKVE 10, 15, 20, 32, 45 MCE-P are variable pressure units for residential building service and commercial building service. Galvanized steel base. They can also be used in agriculture and in watering systems. There are 1, 2, 3 or 4 multi-impeller vertical centrifugal pumps with coupling with MCE-P variable frequency drive installed as standard. One control unit and one pressure sensor per units. Delivery check valve and expansion vessel for each pump. Suction and delivery manifolds in AISI 304 stainless steel. Possibility of remote control thanks to the D.Connect service (D.Connect Box supplied separately). The units are supplied assembled, set up and tested directly in the factory and complete with installation and maintenance instructions and test report of the test. The NKVE 10 S, 15 S and 20 S models have all the parts in contact with the liquid in stainless steel. Internal pump body, impellers and jacket in AISI 304 steel, diffusers in technopolymer. Removable mechanical seal in silicon carbide-graphite. It is possible to remove it without removing the motor, starting from the 5.5 kW models. The NKV 32 and 45 versions have the impellers, diffusers and jacket in AISI 304 stainless steel. Pump body and sealing port in cataphorized cast iron. Mechanical seal in removable silicon carbide-graphite without removing the motor starting from the 5.5 kW models. Available on request version X with materials in contact with water in AISI 316 stainless steel.

Teknisk specifikation

Unik ref.NKVE-Booster-sets
ProduktfamilieVSD Booster set
ProduktgruppeVSD Booster set
TypeByggematerialer
Udgivelsesdato2020-12-17
Udgavenummer1

Links

Produkt-URLhttps://www.dabpumps.com/en/products/pressure-units/electronic-pressure-units/1-2-3-4-nkve-10-15-20-32-45-mce-p
Monteringsvejledninghttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_001359321.pdf
Produktcertificeringhttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_001359321.pdf
Teknisk beskrivelsehttps://www.dabpumps.com/sites/default/files/document/60152203_1-2-3-4-NKVE_MCE_TS_ENG.pdf

Relateret

Materiale primærtStål
Materiale sekundærtCast iron
Designet iItalien
Fremstillet iItalien

Klassifikation

BIMobject-kategoriVVS - Pumper
CSI MasterFormat 2014-kode22 11 23
CSI MasterFormat 2014-titelDomestic Water Pumps
CSI UniFormat II-kodeD2010
CSI UniFormat II-titelPlumbing Fixtures

Tilgængelighed i region

Europa
Åland
Albanien
Andorra
Belgien
Bosnien-Herzegovina
Bulgarien
Cypern
Danmark
Estland
Færøerne
Finland
Frankrig
Gibraltar
Grækenland
Guernsey
Holland
Hviderusland
Irland
Island
Isle of Man
Italien
Jan Mayen
Jersey
Kroatien
Letland
Liechtenstein
Litauen
Luxembourg
Malta
Moldova
Monaco
Montenegro
Nordmakedonien
Norge
Østrig
Polen
Portugal
Rumænien
Rusland
San Marino
Schweiz
Serbien
Slovakiet
Slovenien
Spanien
Storbritannien
Sverige
Tjekkiet
Tyskland
Ukraine
Ungarn
Vatikanstaten