CaptiveAire

Heat & Condensate Exhaust Only Vent Hood, VH1 Series

Name: Heat & Condensate Exhaust Only Vent Hood, VH1 Series
Rating: 3.7 (6 reviews)

3.7(6 reviews)

VH1 Series

Heat & Condensate Exhaust Hood
The VH1 Series is a Type II, Exhaust Only Hood to be used over equipment not producing grease laden vapors. Type II hoods are used for condensation or heat removal applications.

ADVANTAGES

Superior Exhaust Flow Rates:
Construction: Single wall type hood fabricated of Type 304 stainless steel, #3 or #4 polish, on all exposed surfaces when used in condensate applications. Type 430 stainless steel, #3 or #4 polish available when used for heat applications. Pre-punched hanging angles on each end of hood. Additional set provided for hoods longer than 12'.
Condensate Applications: Integral 4-sided perimeter gutter and one drain standard for high-moisture exhaust.
Optional Double Wall Front: Used when switches are needed on the face of the hood. Mechanical baffle provides a built-in wiring chase for optimal positioning of electrical controls and outlets on the front face of the hood.
Optional Make-Up Air: Up to 80% make-up air can be supplied through optional front and/or side plenums (PSP Accessory).
Optional Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.

PERFORMANCE
ConfigurationLight Load Exhaust CFM/ftHeavy Load Exhaust CFM/ftWall & 1-piece island 100 150

CERTIFICATIONS
The VH1 Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models VH1 are ETL Listed under file number 3186625SAT-001 and complies with UL710, ULC710 and ULC-S646 Standards.

Teknisk specifikation

Unik ref.captiveaire-040
ProduktfamilieHVAC
ProduktgruppeHood and Ventilation Equipment
TypeObjekt (enkelt objekt)
Udgivelsesdato2012-09-26
Udgavenummer1

Links

Produkt-URLhttp://www.captiveaire.com/catalogcontent/hoods/vh/index.asp?catid=182

Relateret

Designet iUSA
Fremstillet iUSA

Klassifikation

BIMobject-kategoriHVAC - Mekanisk ventilation
Uniclass 2015-kodeSs_65_40_33_51
Uniclass 2015-beskrivelseMechanical supply ventilation systems
CSI MasterFormat 2014-kode23 00 00
CSI MasterFormat 2014-titelHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass-nummer23-33 00 00
OmniClass-betegnelseHVAC Specific Products and Equipment
CSI UniFormat II-kodeD30
CSI UniFormat II-titelHVAC

Tilgængelighed i region

Nordamerika
Anguilla
Antigua og Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Caribbean Netherlands
Caymanøerne
Costa Rica
Cuba
Curaçao
De britiske jomfruøer
Dominica
Dominikanske Republik
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøerne
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinerne
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøerne
USA