ARDEX SD M™ Designer Floor Finish™

ARDEX SD-M™ is a self-drying, trowelable topping for fast-track finishing or resurfacing of interior concrete, terrazzo and ceramic, quarry and porcelain tile. A blend of Portland cement and other hydraulic cements, ARDEX SD-M can be used to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing.

Key Features

Use over concrete, terrazzo and ceramic, quarry and porcelain tile
Provides a smooth, permanent, durable finish
Easy to mix and apply
Mixes with water only, no additives necessary
Outstanding coverage with excellent bond
Mold and mildew resistant
Portland cement-based
Use for interior floors only
Can be used to create a burnish-polished surface on indoor concrete
Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications

Specifikation

Installation
Mixing Ratio: 2 quarts (1.9 L) of water to one 10 lb. (4.5 kg) bag
For smaller batches, use 2.5 parts powder to 1 part water by volume for the scratch and finish coat, or 3.5 parts powder to 1 part water for filling pop-outs and spalls.
Coverage: 80 – 100 sq. ft. (7.4 – 9.3 sq. m) per bag in 2 coats; (Actual coverage may vary)
Performance
Initial Set (ASTM C191): Approx. 45 minutes
Final Set (ASTM C191): Approx. 90 minutes
Compressive Strength (ASTM C109/mod – Air Cure Only): 5,000 psi (352 kg/sq. cm.) at 28 days
Flexural Strength (ASTM C348): 1,200 psi (84 kg/sq. cm.) at 28 days
Walkable: 2 hours
Begin Processing: 24 – 72 hours
Colors Available: Gray and White
Packaging: 10 lb. (4.5 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Protect unused material by removing air from bag and sealing tightly.
VOC: 0
Shelf Life: 6 months, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.

Teknisk specifikation

Unik ref.ARDEX-sd-m
ProduktfamilieARDEX Surfaces
ProduktgruppeOverlays and Toppings
TypeObjekt (enkelt objekt)
Udgivelsesdato2024-02-21
Udgavenummer1

Links

Produkt-URLhttps://www.ardexamericas.com/product/ardex-sd-m/
Instruktionsvideohttps://youtu.be/dSvCKuw6wRY
Teknisk beskrivelsehttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2018/05/ARDEX-SD-M-Technical-Data-3.pdf

Klassifikation

BIMobject-kategoriGulvbelægning - Underlag
IFC-klassifikationFloor
UNSPSC-navnCarpet or rug underlays
UNSPSC-kode30161719
Uniclass 2015-kodePr_35_31_06_80
Uniclass 2015-beskrivelseSmoothing and levelling underlay compounds
CSI MasterFormat 2014-kode06 16 26
CSI MasterFormat 2014-titelUnderlayment
OmniClass-nummer23-15 17 11 13 11 13
OmniClass-betegnelsePortland Cement Floor Underlayments
CSI UniFormat II-kodeB1010
CSI UniFormat II-titelFloor Construction

Tilgængelighed i region

Nordamerika
Anguilla
Antigua og Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Caribbean Netherlands
Caymanøerne
Costa Rica
Cuba
Curaçao
De britiske jomfruøer
Dominica
Dominikanske Republik
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøerne
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinerne
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøerne
USA