Lightweight Stainless Steel Reduced Pressure Zone Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 40/40G
Lightweight Stainless Steel Reduced Pressure Zone Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 40/40G
Lightweight Stainless Steel Reduced Pressure Zone Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 40/40G
Lightweight Stainless Steel Reduced Pressure Zone Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 40/40G

    Lightweight Stainless Steel Reduced Pressure Zone Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 40/40G

    Ames Deringer™ 40 and 40G Reduced Pressure Zone Assemblies are designed to prevent hazardous contaminants and non-health hazard pollutants from entering the potable water supply system caused by backpressure and/or backsiphonage conditions. Deringer 40 features integral Eccentric-seal™ butterfly shutoff valves for a short lay length, and True-Seal™ and Dual-action™ checks for high performance at low- and high-flow rates. Deringer 40G also features Dual-action checks, but with OS&Y shutoff valves.

    Either may be installed under continuous pressure service to protect against both backpressure and backsiphonage. Maximum working pressure: 175psi (12 bar).


    Specifikation
    • Features

      • Integral shutoffs for shorter lay length and lightweight construction (Deringer 40 only)
      • Tamper-resistant test cocks
      • Dual-action check module for low- and high-flow performance
      • Prewired supervisory switches (Deringer 40 only)
      • Bow-seal™ full access cover for lower weight and easy access to valve internals
    Teknisk specifikation
    • Unik ref.deringer-40-40g-backflow-preventer
    • ProduktfamiliePlumbing & Flow Control Solutions
    • ProduktgruppeBackflow Prevention
    • TypeObjekt (enkelt objekt)
    • Udgivelsesdato2020-03-10
    • Udgavenummer1
    Relateret
    • Materiale primærtBronze
    • Designet iUSA
    • Fremstillet iUSA
    Klassifikation
    • BIMobject-kategoriVVS - Ventiler
    • IFC-klassifikationVentil
    • UNSPSC-navnValves
    • UNSPSC-kode401416
    • Uniclass 2015-kodePr_65_54_40_13
    • Uniclass 2015-beskrivelseCheck valves
    • CSI MasterFormat 2014-kode40 05 65
    • CSI MasterFormat 2014-titelValves for Pump Control and Check Service
    • OmniClass-nummer23-27 31 19
    • OmniClass-betegnelseCheck Valves
    • CSI UniFormat II-kodeC1030
    • CSI UniFormat II-titelFittings

    Tilgængelighed i region

    Nordamerika
    Canada
    USA