Air Gaps For Reduced Pressure Zone Assemblies - Air Gaps

Air Gaps For Reduced Pressure Zone Assemblies - Air Gaps

Air Gaps for Reduced Pressure Zone Assemblies provide an unobstructed, physical separation between the discharge end of a potable water supply line and an open receiving vessel. The installation of an air gap and drain line are recommended on reduced pressure zone assemblies. Air Gaps can be installed vertically or horizontally (vent elbow required for vertical installation.)

Specifikation
  • Features

    • Detects potential underground water leaks or unauthorized water usage
    • Seats, discs, and auxiliary bypass line/components are all field replaceable
    • Gear-operated ball valve shutoffs with pre-wired tamper switches
    • Both check modules can be easily accessed via a single top entry cover, and servicing requires no special tools
Teknisk specifikation
  • Unik ref.air-gaps
  • ProduktfamiliePlumbing & Flow Control Solutions
  • ProduktgruppeBackflow Prevention
  • TypeObjekt (enkelt objekt)
  • Udgivelsesdato2019-11-18
  • Udgavenummer2
Relateret
  • Materiale primærtBronze
  • Designet iUSA
  • Fremstillet iUSA
Klassifikation
  • BIMobject-kategoriVVS - Ventiler
  • IFC-klassifikationVentil
  • UNSPSC-navnValves
  • UNSPSC-kode401416
  • Uniclass 2015-kodePr_65_54_40_13
  • Uniclass 2015-beskrivelseCheck valves
  • CSI MasterFormat 2014-kode40 05 65
  • CSI MasterFormat 2014-titelValves for Pump Control and Check Service
  • OmniClass-nummer23-27 31 19
  • OmniClass-betegnelseCheck Valves
  • CSI UniFormat II-kodeC1030
  • CSI UniFormat II-titelFittings

Tilgængelighed i region

Nordamerika
Canada
USA