Publikovat produkty
Redi-Roof Standing Seam metal roof panel

Redi-Roof Standing Seam metal roof panel

4.6 out of 5 stars4.6(5 reviews)
Features
  • Available with or without offsets
  • Factory eave notching available
  • Herr-Voss corrective leveled
  • Labor-saving one-piece design
  • Stiffener beads available
  • 30-year non-prorated finish warranty
  • Panel lengths up to 45’

Redi-Roof may be specified in either a batten or standing-seam profile and is intended for application over a solid substrate with a minimum 3:12 roof pitch. Typical underlayments include plywood, nailboard insulation or equal. Panels are factory roll-formed in continuous lengths. Maximum panel length is 45’ and minimum panel length is 4’.

Trim

Redi-Roof may be specified in either a batten or standing-seam profile and is intended for application over a solid substrate with a minimum 3:12 roof pitch. Typical underlayments include plywood, nailboard insulation or equal. Panels are factory roll-formed in continuous lengths. Maximum panel length is 45’ and minimum panel length is 4’.

Redi-Roof panels feature an offset profile which adds strength and allows room for a hex head fastener. The clip, with its button-punched design, ensures an extra-snug fit. The one-piece design allows for ease of installation.

Installation

Redi-Roof panels shall be installed over solid decking with an underlayment of 30# (min.) roofing felt applied horizontally from eave to ridge. Panels shall be fastened using Petersen Aluminum nonpenetrating clips, fastening on 18” centers (max.). Minimum slope at 3:12 pitch. Redi-Roof batten panels cannot be lapped in the field. Consult a local architect/engineer for requirements of local codes and conditions.

Technická specifikace
  • Jedinečná ref. hodnotaroof-panel-pac-clad-redi-roof-standing-seam
  • Skupina výrobkůRoof Panels
  • Skupina produktůRoof Panels
  • TypObjekt
  • Datum zveřejnění2015-06-09
  • Číslo vydání1
Související
  • Navrženo vSpojené státy americké
  • Vyrobeno vSpojené státy americké
Klasifikace
  • Kategorie objektu BIMKonstrukce - Střecha
  • Klasifikace IFCStřecha
  • Název UNSPSCRoofing materials
  • Kód UNSPSC301515
  • Kód Uniclass 2015Pr_25_93_72
  • Popis Uniclass 2015Roofing and cladding units
  • Kód CSI MasterFormat 201407 40 00
  • Název CSI MasterFormat 2014Roofing and Siding Panels
  • Číslo OmniClass23-13 39 27
  • Název OmniClassRoof Cladding

Dostupnost regionu

Severní Amerika
Spojené státy americké