Publikovat produkty
Corridor with double row of racks
Corridor with double row of racks
Corridor with double row of racks
Corridor with double row of racks
Corridor with double row of racks
Corridor with double row of racks
    GESAB

    Corridor with double row of racks

    Cold corridor enclosures to be installed in the DPC the CCNOC series of the GESAB brand. They consist of side-opening doors for access to the central aisle, polycarbonate plate roof and vertical closing plates.

    Dimensions: 2300 x 3300 x 180 mm mm.

    The dimensions and equipment shown is just an example, being fully customizable according to customer needs.

    The structural assembly is modular and adaptable, and permit guarantee the existence of a wide range of solutions to meet different needs. In this way, possible future adaptations of the furniture are guaranteed according to the evolution of the needs of the Control Room.

    Specifikace
    • TECHNICAL ASPECTS

      FRONTAL AND DOORS:

      The front access structure must be an assembly formed by a self-supporting steel structure, with lateral steel plate coverings that will provide the necessary space to hide the sliding doors and the mechanical system during their opening. Approximate dimensions (al x an x pr): 2300 x 3300 x 180 mm

      The front panel will not need to be fixed to the first racks, allowing them to be easily moved and removed from the enclosure.

      Doors must be constructed with aluminum frame and laminated glass interior. Standard Natural Anodized aluminum finish.

      The doors must have a synchronized mechanical opening mechanism with the leaves completely hidden in the front metal structure and with an automatic mechanical locking system allowing centralized access control for each corridor enclosure.

      The dimensions of the access structure msut be configurable for racks of any length, with no rack handling required for installation, only the fixing of the structure to the racks, so that the system can be perfectly hot deployed for data centers under load.

      CEILING:

      The interior ceiling of the aisles must be built by means of a 40x40mm telescopic steel structure on which a 40x40mm aluminum L will be fixed. The length of the ceiling must be in accordance with the number of racks and their requested width.

      The roof panels must be made of cellular polycarbonate, providing adequate insulation between the inside and outside of the enclosure. The perimeter profile must be made of aluminum, finished with flexible rubber that secures the sealing between joints to guarantee the necessary watertightness and insulation.

      Polycarbonate sheets must be integrated in 20mm thick profiles.

      El The ceiling must be translucent to allow light to enter the room and must be composed of modules of similar width to the racks so that it can be lifted.

      The enclosure must allow installation on any type of racks on the market, without the need for them to be homogeneous. It must be able to be implemented on hot racks without the need to cut off the power supply and guarantee its perfect adaptation and operation, thus achieving significant energy savings.

      HEIGHT ADJUSTMENT PLATES:

      Vertical locking plates shall be installed from the roof of the racks to the roof of the enclosure for those racks with a height different from 47 U. They must be adjustable by two sliding plates, to be able to adapt to the particular height of each rack. The width of the adjustable plates must correspond to the width of each rack according to the proposed layout.

      MATERIALS

      The metal components of the enclosure will be made of cold laminated steel sheet in accordance with standard UNE EN 10130: 1999, painted with high quality micro-textured epoxy powder paint according to UNE 48-098-90; UNE 48-031-80; UNE 48-026-80; UNE 48-024-80; UNE 48-032-80; UNE 48-183-84 48-024-80; UNE 48-032-80; UNE 48-183-84 and UNE 48-169-92 and subjected to demanding aesthetic finish durability tests according to ISO 7253 and DIN 50021 standards, carried out in laboratories accredited by ENAC.

      QUALITY AND GUARANTEE

      Both domestic design and manufacture must be guaranteed (EU). With leading suppliers in each sector to ensure the highest quality standards and an exhaustive internal control throughout the process from design to assembly.

      CERTIFICATES OF EXCELLENCE

      ISO 9001 / ISO 14001 / ISO 45001

      The company manufacturing the product must be certified by an ISO 9001, 14001 and 45001 accredited organization in order to guarantee the highest standards in quality, environmental management and health and safety.

      The warranty period of the products will be extended for a period of at least TEN YEARS against manufacturing defects, except for accessories, components and mechanical, electrical and electronic elements that the system or product incorporates, which warranty period will be of at least two years.

      SOFTWARE AND FORMATS

      The corridor enclosure must have 3D families in REVIT (.rfa) and 3D STUDIO MAX (.fbx and .max) formats, for its integration in the technical documentation of the project.

      SUSTAINABILITY AND ENVIRONMENTAL HEALTH

      The ability to repair and replace any part, as well as quality and durability are effective eco-design strategies. It must be ensured the use of materials with high recyclability and the fabrication of materials with a high percentage of already recycled matter.

      The repairability and replaceability of all components of the consoles must be guaranteed for the entire service life of the product.

      The manufacturer shall certify 80% recycled aluminum in all aluminum extrusions and castings and 70% in steel parts.

    Technická specifikace
    • Jedinečná ref. hodnotacorridor-with-double-row-of-racks
    • Skupina výrobkůCORRIDOR ENCLOSURE
    • Skupina produktůCCNOC
    • TypObjekt
    • Datum zveřejnění2023-05-03
    • Číslo vydání1
    • Výška (mm)2300
    • Šířka (mm)3300
    Související
    • Hlavní materiálOcel
    • Vedlejší materiálHliník
    • Navrženo vŠpanělsko
    • Vyrobeno vŠpanělsko
    Klasifikace
    • Kategorie objektu BIMElektronika - IT vybavení
    • Klasifikace IFCNábytek

    Dostupnost regionu

    Evropa Asie Severní Amerika Afrika Jižní Amerika Oceánie
    Ålandy
    Afghánistán
    Anguilla
    Alžírsko
    Argentina
    Americká Samoa
    Albánie
    Arménie
    Antigua a Barbuda
    Angola
    Bolívie
    Austrálie
    Andorra
    Ázerbájdžán
    Aruba
    Benin
    Brazílie
    Cookovy ostrovy
    Belgie
    Bahrain
    Bahamy
    Botswana
    Chile
    Federativní státy Mikronésie
    Bělorusko
    Bangladéš
    Barbados
    Burkina Faso
    Ekvádor
    Fidži
    Bosna a Hercegovina
    Bhútán
    Belize
    Burundi
    Falklandy (Malvíny)
    Francouzská Polynésie
    Bulharsko
    Britské indickoocenánské území
    Bermudské ostrovy
    Čad
    Francouzská Guyana
    Guam
    Černá Hora
    Brunej
    Britské Panenské ostrovy
    Demokratická republika Kongo
    Guyana
    Kiribati
    Česká republika
    Čína
    Curaçao
    Džibuti
    Kolumbie
    Marshallovy ostrovy
    Chorvatsko
    Filipíny
    Dominika
    Egypt
    Paraguay
    Nauru
    Dánsko
    Gruzie
    Dominikánská republika
    Eritrea
    Peru
    Niue
    Estonsko
    Hongkong
    Gaudeloupe
    Etiopie
    Surinam
    Nová Kaledonie
    Faerské ostrovy
    Indie
    Grenada
    Gabon
    Uruguay
    Nový Zéland
    Finsko
    Indonésie
    Grónsko
    Gambie
    Venezuela
    ostrov Norfolk
    Francie
    Irák
    Guatemala
    Ghana
    Palau
    Gibraltar
    Írán
    Haiti
    Guinea
    Papua-Nová Guinea
    Guernsey
    Izrael
    Honduras
    Guinea Bissau
    Pitcairnovy ostrovy
    Irsko
    Japonsko
    Jamajka
    Jihoafrická republika
    Šalamounovy ostrovy
    Island
    Jemen
    Kajmanské ostrovy
    Jižní Súdán
    Samoa
    Itálie
    Jordánsko
    Kanada
    Kamerun
    Severní Mariany
    Jan Mayen
    Kambodža
    Karibské Nizozemsko
    Kapverdy
    Tokelau
    Jersey
    Katar
    Kostarika
    Keňa
    Tonga
    Kypr
    Kazachstán
    Kuba
    Komorské ostrovy
    Tuvalu
    Lichtenštejnsko
    Kokosové ostrovy
    Martinik
    Kongo
    United States Minor Outlying Islands
    Litva
    Korejská lidově demokratická republika
    Mexiko
    Lesotho
    Vanuatu
    Lotyšsko
    Korejská republika
    Montserrat
    Libérie
    Východní Timor
    Lucembursko
    Kuvajt
    Nikaragua
    Lybie
    Wallis a Futuna
    Maďarsko
    Kyrgyzstán
    ostrovy Turks a Caicos
    Madagaskar
    Malta
    Laos
    Panama
    Malawi
    Moldavsko
    Libanon
    Pannenske Ostrovy
    Mali
    Monako
    Macao
    Portoriko
    Maroko
    Německo
    Malajsie
    Saint-Pierre a Miquelon
    Mauricius
    Nizozemsko
    Maledivy
    Salvador
    Mauritánie
    Norsko
    Mongolsko
    Spojené státy americké
    Mayotte
    ostrov Man
    Myanmar (Barma)
    Svatá Lucie
    Mosambik
    Polsko
    Nepál
    Svatý Bartoloměj
    Namibie
    Portugalsko
    Omán
    Svatý Kryštof a Nevis
    Niger
    Rakousko
    Pákistán
    Svatý Martin
    Nigérie
    Řecko
    Palestinská území
    Svatý Martin
    Pobřeží slonoviny
    Rumunsko
    Saúdská Arábie
    Svatý Vincenc a Grenadiny
    Réunion
    Rusko
    Singapur
    Trinidad a Tobago
    Rovníková Guinea
    San Marino
    Spojené arabské emiráty
    Rwanda
    Severní Makedonie
    Šrí Lanka
    Senegal
    Slovensko
    Sýrie
    Seychely
    Slovinsko
    Tádžikistán
    Sierra Leone
    Španělsko
    Tchaj-wan
    Somálsko
    Srbsko
    Thajsko
    Středoafrická republika
    Švédsko
    Turecko
    Súdán
    Švýcarsko
    Turkmenistán
    Svatá Helena
    Ukrajina
    Uzbekistán
    Svatý Tomáš a Princův ostrov
    Vatikán
    Vánoční ostrov
    Svazijsko
    Velká Británie
    Vietnam
    Tanzánie
    Togo
    Tunisko
    Uganda
    Zambie
    Západní Sahara
    Zimbabwe