Geofor - Overlapping prefabricated bed joint reinforcement

Geofor - Overlapping prefabricated bed joint reinforcement

Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.

Specifikace

Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.

Technická specifikace

Jedinečná ref. hodnotageofor
Skupina výrobkůBed Joint Reinforcement
Skupina produktůGeofor
TypObjekt
Datum zveřejnění2017-05-08
Číslo vydání1

Odkazy

URL produktuhttp://www.geohidrol.com/?products=geofor%C2%AE

Související

Hlavní materiálOcel
Navrženo vŠpanělsko
Vyrobeno vŠpanělsko

Klasifikace

Kategorie objektu BIMStavební materiály - Výztuhy
Klasifikace IFCVýztužná síť
Název UNSPSCBricks
Kód UNSPSC301316
Kód Uniclass 2015Ss_25_13_50
Popis Uniclass 2015Masonry wall systems
Kód CSI MasterFormat 201404 05 19.26
Název CSI MasterFormat 2014Masonry Reinforcing Bars
Číslo OmniClass23-13 21 21 11
Název OmniClassMasonry Reinforcing
Kód CSI UniFormat IIB2010
Název CSI UniFormat IIExterior Walls

Dostupnost regionu

Evropa
Ålandy
Albánie
Andorra
Belgie
Bělorusko
Bosna a Hercegovina
Bulharsko
Černá Hora
Česká republika
Chorvatsko
Dánsko
Estonsko
Faerské ostrovy
Finsko
Francie
Gibraltar
Guernsey
Irsko
Island
Itálie
Jan Mayen
Jersey
Kypr
Lichtenštejnsko
Litva
Lotyšsko
Lucembursko
Maďarsko
Malta
Moldavsko
Monako
Německo
Nizozemsko
Norsko
ostrov Man
Polsko
Portugalsko
Rakousko
Řecko
Rumunsko
Rusko
San Marino
Severní Makedonie
Slovensko
Slovinsko
Španělsko
Srbsko
Švédsko
Švýcarsko
Ukrajina
Vatikán
Velká Británie