Publikovat produkty
Brivo ACS300 Ethernet/Wi-Fi Controller
Brivo ACS300 Ethernet/Wi-Fi Controller
    Brivo

    Brivo ACS300 Ethernet/Wi-Fi Controller

    The Brivo ACS300 is our next generation of Ethernet/Wi-Fi controller designed to support components of Brivo Access control platforms.

    Building blocks for Brivo cloud-based security

    Brivo’s controllers are the supporting components of your Brivo access control platform. The ACS300-E is used for Brivo Access accounts.

    KEY FEATURES:

    • Supports:
      • Brivo Smart Readers as well as OSDP and Weigand readers
      • Up to 2 card readers per control panel
      • Brivo Mobile Pass
      • Select Brivo wireless lock integrations
    • Host communication via ethernet or WiFi
    • Host authentication via digital certificates
    • IP-based access control and alarms
    • Power over Ethernet (PoE+)
    • Encrypted storage and communications
    Specifikace
    • Total number of credentials Unlimited credentials per ACS300-E controller when connected to Brivo Access. Up to 250,000 credentials per controller while offline.
      Maximum number of card readers 2
      Event history 60,000 events (FIFO) offline from host
      Input points 8 inputs per controller
      On board; (2) door position inputs; (2) Request to exit inputs; (4) Auxiliary inputs
      Output relays 6 outputs per controller
      (2) non-latching wet (12V, 350mA) or dry (6A @ 28VDC) selectable door lock relays, plus (4) general purpose dry relays (6A @ 28VDC)
      Max power consumption 12VDC @ 2.5A peak with all outputs at maximum allowed current limits.
      Card reader inputs (2) Wiegand Ports
      or
      (1) RS-485 Port for (2) OSDP Readers
      Temperature and humidity range Operating temperature: 32ºF to 125ºF, (0ºC to 49ºC) Humidity; Max 85% non-condensing
      Included components (2) MOV surge suppressors
      Input Power Recommended: Power over Ethernet (PoE+) from network switch or PoE+ injector
      Alternate: 12VDC, 2.5A - power supply (not included)
      Output Reader Power The controller can also supply power to the card reader devices:
      Each Wiegand Card Reader Port can supply 350mA @ 12VDC
      RS-485 Port can supply a total of 350mA @12VDC
      Enclosure dimensions 7.4”W x 7.5”H x 1.5”D (187mm x 190mm x 40mm)
      Host communications Ethernet 10/100Mbps or WiFi IEEE 802.11 b/g/n (2.4GHz)
    Technická specifikace
    • Jedinečná ref. hodnotabrivo-acs300-ethernet_wi-fi-controller
    • Skupina výrobkůDevices
    • Skupina produktůControl Panels
    • TypObjekt
    • Datum zveřejnění2023-08-14
    • Číslo vydání1
    Související
    • Navrženo vSpojené státy americké
    • Vyrobeno vSpojené státy americké
    Klasifikace
    • Kategorie objektu BIMElektronika - Controls
    • Klasifikace IFCRegulátor
    • Kód Uniclass 2015Pr_75_75_27
    • Popis Uniclass 2015Electronic access control products
    • Kód CSI MasterFormat 201408 74 00
    • Název CSI MasterFormat 2014Access Control Hardware
    • Číslo OmniClass23-29 13 00
    • Název OmniClassSecurity Access Controls

    Dostupnost regionu

    Severní Amerika
    Anguilla
    Antigua a Barbuda
    Aruba
    Bahamy
    Barbados
    Belize
    Bermudské ostrovy
    Britské Panenské ostrovy
    Curaçao
    Dominika
    Dominikánská republika
    Gaudeloupe
    Grenada
    Grónsko
    Guatemala
    Haiti
    Honduras
    Jamajka
    Kajmanské ostrovy
    Kanada
    Karibské Nizozemsko
    Kostarika
    Kuba
    Martinik
    Mexiko
    Montserrat
    Nikaragua
    ostrovy Turks a Caicos
    Panama
    Pannenske Ostrovy
    Portoriko
    Saint-Pierre a Miquelon
    Salvador
    Spojené státy americké
    Svatá Lucie
    Svatý Bartoloměj
    Svatý Kryštof a Nevis
    Svatý Martin
    Svatý Martin
    Svatý Vincenc a Grenadiny
    Trinidad a Tobago