ARDEX SD M™ Designer Floor Finish™

ARDEX SD-M™ is a self-drying, trowelable topping for fast-track finishing or resurfacing of interior concrete, terrazzo and ceramic, quarry and porcelain tile. A blend of Portland cement and other hydraulic cements, ARDEX SD-M can be used to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing.

Key Features

Use over concrete, terrazzo and ceramic, quarry and porcelain tile
Provides a smooth, permanent, durable finish
Easy to mix and apply
Mixes with water only, no additives necessary
Outstanding coverage with excellent bond
Mold and mildew resistant
Portland cement-based
Use for interior floors only
Can be used to create a burnish-polished surface on indoor concrete
Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications

Specifikace

Installation
Mixing Ratio: 2 quarts (1.9 L) of water to one 10 lb. (4.5 kg) bag
For smaller batches, use 2.5 parts powder to 1 part water by volume for the scratch and finish coat, or 3.5 parts powder to 1 part water for filling pop-outs and spalls.
Coverage: 80 – 100 sq. ft. (7.4 – 9.3 sq. m) per bag in 2 coats; (Actual coverage may vary)
Performance
Initial Set (ASTM C191): Approx. 45 minutes
Final Set (ASTM C191): Approx. 90 minutes
Compressive Strength (ASTM C109/mod – Air Cure Only): 5,000 psi (352 kg/sq. cm.) at 28 days
Flexural Strength (ASTM C348): 1,200 psi (84 kg/sq. cm.) at 28 days
Walkable: 2 hours
Begin Processing: 24 – 72 hours
Colors Available: Gray and White
Packaging: 10 lb. (4.5 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Protect unused material by removing air from bag and sealing tightly.
VOC: 0
Shelf Life: 6 months, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.

Technická specifikace

Jedinečná ref. hodnotaARDEX-sd-m
Skupina výrobkůARDEX Surfaces
Skupina produktůOverlays and Toppings
TypObjekt
Datum zveřejnění2024-02-21
Číslo vydání1

Odkazy

URL produktuhttps://www.ardexamericas.com/product/ardex-sd-m/
Instruktážní videohttps://youtu.be/dSvCKuw6wRY
Technický popishttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2018/05/ARDEX-SD-M-Technical-Data-3.pdf

Klasifikace

Kategorie objektu BIMPodlahy - Podklad
Klasifikace IFCFloor
Název UNSPSCCarpet or rug underlays
Kód UNSPSC30161719
Kód Uniclass 2015Pr_35_31_06_80
Popis Uniclass 2015Smoothing and levelling underlay compounds
Kód CSI MasterFormat 201406 16 26
Název CSI MasterFormat 2014Underlayment
Číslo OmniClass23-15 17 11 13 11 13
Název OmniClassPortland Cement Floor Underlayments
Kód CSI UniFormat IIB1010
Název CSI UniFormat IIFloor Construction

Dostupnost regionu

Severní Amerika
Anguilla
Antigua a Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudské ostrovy
Britské Panenské ostrovy
Curaçao
Dominika
Dominikánská republika
Gaudeloupe
Grenada
Grónsko
Guatemala
Haiti
Honduras
Jamajka
Kajmanské ostrovy
Kanada
Karibské Nizozemsko
Kostarika
Kuba
Martinik
Mexiko
Montserrat
Nikaragua
ostrovy Turks a Caicos
Panama
Pannenske Ostrovy
Portoriko
Saint-Pierre a Miquelon
Salvador
Spojené státy americké
Svatá Lucie
Svatý Bartoloměj
Svatý Kryštof a Nevis
Svatý Martin
Svatý Martin
Svatý Vincenc a Grenadiny
Trinidad a Tobago